Features and Advantages
With closed-loop servo motor, precise positioning, dispensing repeatability of 98% and minimum dispensing amount of 0.1ul can be achieved.
With syringe guide installation design, 10/30/50ml syringes can be used and quickly removed and replaced to facilitate operation.
With special negative pressure controller, the lower viscosity limit of applicable media can be reduced to 2000cps.
The screw is made of tungsten steel, so it is highly wear-resistant for media containing particles and medium & high viscosity media.
By controlling the forward and reverse rotation of the screw, abnormal problems such as glue pulling are solved.
With universal lower channel port, different lower channels can be used according to process changes to achieve quick process switching.
Applicable Fluids
Application Fields
Selection Table
| Type | Model | Max. flow rate | Min. dispensing amount | Applicable Fluids | Applicable needles | Needle illustration |
| Non-wear resistant | KSV1000-U | 120ul/s | 2ul | UV thermosetting glue, silica gel, grease and red glue, etc. | Luer-type |
 *Luer-type needle |
| KSV1000-T | 120ul/s | 2ul | T-type | |||
| Wear resistant | KSV1000-T05 | 30ul/s | 0.5ul | Solder paste/silver paste | T-type | |
| KSV1000A-U | 120ul/s | 2ul | Thermal grease and thermal glue, etc. | Luer-type | ||
| KSV1000A-T | 120ul/s | 2ul | T-type | |||
| KSV3000 | 360ul/s | 20ul | Medium & high flow, e.g. TIM glue, etc. | Luer-type |
 *T-type needle |
|
| Hot melt | KSV1000-R | 120ul/s | 2ul | For PUR glue | Luer-type |